Water damage in Samsung Galaxy S6 Active and Galaxy S6 Edge is one of the most common problems. If your smartphone has been damaged by water, it can restore and repair. When your Galaxy S6 or Galaxy S6 Edge gets wet, you have a few choices for preventing irreparable harm. The methods below will help you give your Samsung Galaxy S6 or Galaxy S6 Edge the best chance of surviving a wet cell phone and preventing water damage.
How to Misuse a Samsung Galaxy S6 Active Water Damage?
Table of Contents
When it comes to your Samsung Galaxy S6 Active, there are several things you should avoid doing. Damage to durable equipment is not always preventable, despite the precautions suggested. But if you act the right way when the device gets wet, you can increase the chances of saving the device or the data it holds.
It’s important to look at all of these things and avoid the following problems:
- Start your Samsung Galaxy S6 Active carefully to avoid a short circuit.
- The phone should not connect to the charging cable.
Other than the one to turn off your Samsung Galaxy S6 Active, no other buttons should be pressed; otherwise, the liquid could get inside.
- Do not use a hairdryer or a radiator to dry your smartphone. Only more liquid could possibly spread. Furthermore, the heat harms the equipment.
- Do not use the microwave or the oven to dry the smartphone. The device has the potential to catch fire.
- Do not leave the unit to dry in the sun.
Shaking the smartphone to get the liquid out is not a good idea. You risk doing the exact opposite.
Blowing the liquid off or out of the unit will not work.
What to Do When There’s Water Damage?
So, try to get it dry. Put the phone in a bag of rice and turn it off. Hold on to it for a day. That should soak up all of the water. If the device seems too wet, you might want to put it in direct sunlight for a while. Don’t leave it in the sun for a long time because it could get too hot and break. There are also some revival kits you can buy online, so if you need to, check those out as well. If nothing works, your only choice is to take it to a service center to be fixed.
Ways to Save Your Water Damaged Galaxy S6
1: Dry it.
You can also dry your phone or tablet to help lessen the damage by speeding up the process of getting the water out of your Galaxy S6 or Galaxy S6 Edge that gets wet. Many people try the rice trick to get the water out of a water-damaged Galaxy S6, but there are better ways to get the water out of electronics.
- The best common drying agent is silica gel, which you can find in the “crystal” style cat litter in the pet section of your grocery store.
- You can use instant couscous or instant rice instead of silica. In our tests, they took up water much more quickly than regular rice. Instant oatmeal also works, but it gets all over your phone and makes a mess.
2: Take Out Your Water-Damaged Galaxy S6.
The best way to fix a Galaxy S6 that has been damaged by water is to open the case and let air in.
Remove any remaining water by shaking, tilting, or blowing air into the Galaxy S6 or Galaxy S6 Edge. By getting rid of the water, you can stop any more damage to your device.
Check to See if Water Damaged Fix has Worked
If your smartphone seems to be dry. Then try turning it on and seeing if it works normally. One way to check this is to charge the battery and see if it stays charged normally. You can also sync your Galaxy S6 to your Mac or Windows computer to see if it will work so you can get your data back. You can also try replacing the battery to see whether it works properly.
Even if you’ve tried all of these ways to fix your water-damaged Galaxy S6, you can still sell it. Remember to keep your SIM card and SD card because they contain important information like contacts and other data that can be useful and save you time when you get a smartphone.
Read More: How Can I Backup My Samsung Galaxy S5 to PC?