Before installation of window in your PC or Laptop you need to copy the setup of window in your USB/flash drive. For the smooth and proper work of your USB/Flash drive during installation of window you need to bootable it. An operating system (OS) like Microsoft Windows, Apple iOS, Google’s Android OS, Apple macOS, Linux Operating System, is the most basic components for a computer system. It combines all the hardware parts of a computer and enables them to work at the same time and at the same platform for a computer. There are many types and categories of OS. Most important, famous, interesting, reliable and compatible OS in the World is Window’s OS, introduce by Microsoft Company.
You can install the Window’s OS in your computer with two different ways:
- By Using Disk
- By using USB
Both have the same method to install in PCs and laptops.
Steps to make the USB Bootable for the Window Installation
Table of Contents
You can copy install an OS in your computer or laptops after making the USB bootable by using command prompt. There are few steps through you can Bootable the USB:
Step 1:
Press Window logo +R
A Run command prompt will appear as
Step 2:
Write cmd + Enter
First Command Window will appear.
Step 3:
Write diskpart + Enter
Press yes If the new window opens with yes or no options and a new command window will appear as:
Now, onward use the second prompt window for further instruction.
Step 4:
Write list disk + Enter
Message will appear on the Second window.
Step 5:
Write select disk 1 + Enter
Message will appear on the Second window.
Remember:
- Be careful that you have must choose the disk which is represented to your USB.
- Always remove extra USBs if you have connected with your PCs and Laptops. Always focus on the memory of your USB and partition of the C, D, E or F etc.
Step 6:
Write clean + Enter
Message will appear on the Second window.
Step 7:
Write create partition primary + Enter
Message will appear on the Second window.
Step 8:
Write format fs=fat32 quick + Enter
Message will appear on the Second window.
Step 9:
Write active + Enter
Message will appear on the Second window.
Step 10:
Write assign + Enter
Message will appear on the Second window.
Step 11:
Write exit + Enter
To Exit the second window.
Second window will disappear.
Step 12:
Write exit + Enter
To Exit the First window.
First window will disappear.
Now you can check your USB/Flash Drive it’s completely formatted and Bootable for the copy and installation of a widow.
After this you can freely copy the setup Windows in your USB and can install very smoothly and easily.
Important Note:
Your USB Must have memory more than 8 GB(recommended) for window 7 setup.If you are going to copy window 10 then you must have USB of memory more than 15 GB.
Don’t copy anything else except Window’s setup otherwise it will interrupt your installation progress
Read more: How do I fix Window Update problems?
